SPECIFICATIONS
Maximum working pressure:
- 3/4” to 1 1/2” - 145
psi
2” to 12” - 230 psi
Maximum water temperature:
- 3/4” to 1 1/2” - 120°
F
2” to 12” - 140° F
Body Material:
- 3/4” - Polypropylene
1”, 1 1/2” - Corrosion proof copper alloy
2” to 12” - Cast iron
- 1” to 12” meters are painted with baked,
powder-coated epoxy for resistance to
corrosive conditions.
Installation requirement:
2” to 12” - 10 x diameter before and x 5
after for maximum accuracy
3/4” to 1” - no straight pipe requirement
|
3/4”,
1” and 1 1/2”
'M'
Flow Meters
- Only one moving part (impeller) in
contact with water for minimum wear and
utmost reliability.
- Same register design as larger meters.
- Precision quality at economical prices.
- Installs horizontally.
-
2” WMR Flow Meter
- High accuracy down to 5 GPM.
- Threaded couplers for easy
installation and removal.
- Can be installed in a vertical,
horizontal, or oblique position.
-
3”, 4”, 6” and 8” IRT Flow Meters
- Specifically designed for irrigation
applications.
- Measuring accuracy is +/-2%.
- Open water passage resulting in very
low headloss.
- High resistance to fine sand damage.
- Most economical price in the
industry.
- Can be installed in a vertical,
horizontal, or oblique position.
|
|
|
