|
A simple layout for a typical garden.
|
Above: 420-BV-06 Hooked to the Poly Tubing Header Line. Below:
The Spin Clean Filter is easy to clean. |
 |
Simply Lay Out the Main
Header Line and then connect each row using the 420BV-06-LS fittings that come
with each kit. The instructions show you how to use your filter and pressure
regulator assembly. We also instruct you on closing off each row and the
main line.
WATERING
INSTRUCTIONS
Drip Irrigation is not to be used like overhead irrigation. First of all you
are placing a small amount of water in the row, with low pressure, frequently.
Today with water conservation having such a high priority in our lives, ‘drip
irrigation’ allows us to garden with spectacular results and tremendous water
savings!
We recommend that you water one hour per day, everyday during the growing
season (unless it is raining). This will ensure that you gain all of the
benefits of drip irrigation. If this watering schedule is not possible, water as
frequently as possible.
BENEFITS
OF DRIP IRRIGATION
- Water Savings
- Increased Yields
- Less Evaporation
- Decrease Disease
- Fewer weeds in the drier furrows
- Higher crop quality
- Less time spent watering
ENDING THE DRIP TAPE ROWS
 |
When rolling out the Drip Tape
down the Row, give yourself plenty of extra tape at the end of the
Row (about 12" extra).
- Double the Drip Tape over twice for thickness.
- 2" Long Tape Sleeve Cut from Tape
- Remove Sleeve for Periodic Flushing of Laterals if necessary
The Tape
Terminal Fitting will also do a nice job if you prefer a
Fitting! |
Even a Drip Tape with 12" Spacing will give you a nice
even watering.
| 
