10 Mil 5/8" AquaTraxx Drip Tape. For rocky soils or Crops that have a longer growing season.

10 Mil Drip Tape is a medium weight Drip Tape. Best used on Medium to Rocky Soils and on one or 2-season crops.

• 510-12-450 is the most popular Drip Irrigation Tape used by Vegetable Farmers. 
•  
• 18 and 24" Spacing is generally used for Mums and other potted plants. 
•  
• <P>10 mil is a medium weight Drip Tape.  10 mil is best used on Medium to Rocky Soils and on one or 2-season crops.  This mil is also good when you need to bury tape a few inches.  The higher strength will help you retrieve it out of the ground later. </p> <P>This Aquatraxx tape by Toro is standard 5/8" tape.</p> 10 Mil Drip Tape may be re-used for 2 or 3 years in short-season crops and if it is kept out of the weather and away from mice when not in use. </p>
•  
• Drip Tape needs 6 PSI To work properly.    More than 12 PSI will cause drip tape to split!   We recommend our PR-STAKE to measure pressure before going to drip tape. 
•  
• Pressure Regulators are a must to reduce pressure on any irrigation system and keep it in a safe zone.  (Use a 10 PSI or 12 PSI and choose based on your Flow)

AQUATRAXX BY TORO  Premium 5/8" Drip Tape with Unmatched Precision   -   15 Mil AquaTraxx Drip Tape   4,000 Foot Rolls

• Superior precision, uniformity, durability, and plugging resistance
• Seamless construction provides maximum strength
• Blue Stripes for signature of quality -Blue stripes “up” also ensures proper outlet placement
• Enhanced turbulent flow path -Better uniformity with reduced clogging
• Highly resistant to plugging due to multiple inlet filters  :    8" Spacing has 64 filter inlets per outlet. -12” spacing has 200 filter inlets per outlet
•  
• Best-In-Class coefficient of variation (Cv's) – below 3%
• Laser slit outlet eliminates startup plugging and impedes root intrusion
• Precision performance -An incredibly precise flow path molding process results in excellent Cv’s. 
• Ultra-high strength and durability -Strength and flexibility mean easy installation, time and labor savings, and significantly reduced chances of damage.
• No more split seams and unglued overlaps, ensuring reliability. 

FAQ:  How much drip tape can I run at one time on a garden hose?    How much water is this putting out?

The Flow of your drip tape is the 3rd set of numbers in the Model #.  This number is stated in GPM per every 100' of tape that you run.

EXAMPLE:  EA5081245-7500   This tape puts out .45 gpm for every 100 feet that you run.   OR  4.5 gpm for every 1,000' of tape that you run.

TRY IT :     --- I have 12 gpm of water coming out of your garden hose at the field/plot.   Therefore, I can run 2,666 feet of drip tape at one time.  (MATH: 12 divided by .45= 26.666   x 100 feet = 2,666 feet)

--- I have 14 gpm of water  "   "    " ...    Therefore, I can run 3,111 feet of drip tape at one time.

Take your Drip Tape's Flow  (.22, .34, .45, .67, 1.34 and divide it into your GPM.  Multiply that # x 100 feet.

How do you figure your GPM ?   Take your garden hose close to your garden plot or field.  Run it for approx 2 minutes.   

Then time yourself filling up a 5 gallon bucket.  How long did it take? 30 seconds would mean you roughly have 10 gpm.

Lay with Stripes Up  (The blue-stripe shows the side of the Drip Tape that has the slits.  You want the slits/drippers face up.  If any trash happens to enter the drip tape, it is easy to stop up slits /drippers that are face down.  It is harder to push the trash upwards... so placing the drippers face up helps to prevent clogging.)

SPACINGS AVAILABLE :  8", 12", 18", 24"    (Use Pull Down Arrow)