1-800-345-3747
1-800-345-3747
1-800-345-3747
1-800-345-3747

Fittings- for Poly (Blue-Stripe) Power-Loc Fittings

Our Power-Loc Fittings make joining poly tubing easy with no tools required and have great holding power. Sizes available 1/2 inch to 1 inch.

*Power Loc #PL-55 Fittings work on 16mm; 1/2", 17mm Poly, PE, Emitter, DNH, or UniRam Tubing.

*Power Loc #PL-80 Fittings fit 3/4" Poly PE Tubing    --      Power Loc # PL-100 Fittings fit 1" Poly PE Tubing

Jain's Power-Loc™ Product Features
  • A more rugged alternative to insert and compression, Power-Loc fittings have a locking mechanism that is easily tightened after emitterline is pushed on.
  • The patented locking technology works great under high pressures and around heavy foot traffic.
  • Low effort, square thread drive ring quickly locks tubing in place — no tools needed
  • Barb design ensures tubing will not slip out or blow off at high pressure &/or temps
  • Operating pressure: up to 60 PSI


Power-Loc Size Selection Chart Nominal Tubing Size 

Fitting Series # Acceptable ID Acceptable Wall Thickness
Inches MM Inches MM
55 0.520-0.620 13.2 to 15.7 0.045 to 0.055 1.14 to 1.40
80 0.665 to 0.765 16.9 to 19.4 0.035 to 0.055 0.89 to 1.40
100 1.035- 1.075 26.3 to 27.3 0.062 to 0.075 1.57 to 1.91