Standard Model #32PRV.75 Flow Range 4.5 -17.5 gpm. Available in multiple pressures.
Low Flow Model #32PRV.75-LF Flow Range .25 - 4.4 gpm. Available in multiple pressures.
Pressure Regulators are manufactured with non-corrosive, high quality plastic and brass, that withstands all fertilizers and chemicals in common use providing years of trouble-free operation. The one-piece sealed regulating unit – different for each pressure option – is field replaceable and easy to maintain.
Product Advantages
-
Instant response to variations in pressure assuring that outlet pressure will remain constant regardless of inlet pressure.
-
Non-corrosive, high quality plastic and brass bodies withstand commonly used fertilizers and chemicals.
-
Sealed regulating unit with stainless steel spring and a screw are field replaceable and easy to maintain.
-
Built-in operating indicator visually shows when proper outlet pressure is achieved (except 3/4″ low flow).
-
No leakage due to tight seal from rubber diaphragm.
For More, Click here
EXAMPLES FOR DETERMINING INLET PRESSURE
Given Flow Rate = 63 GPM
Nominal Required Pressure = 20 psi
Using Pressure Regulator Model
2” x 6 will result in 10.5 GPM per
regulating unit.
10.5 GPM per regulating unit will
result in an output pressure of 18
psi. (See chart at right)
Headloss of 2” x 6 Pressure
Regulator at 63 GPM is 5 psi. (See
chart at left)
Design pressure at inlet of Pressure
Regulator should be 18 + 5 = 23 psi
